Hammer drill 850W – Detailed Description
Here are some short descriptions about the power tool.
The 850 W motor of this electric drill consists of an all-copper armature and industrial stator. These parts are made by machines under the European CE standard. Polyester and resin are used in the armature structure of these parts; this layer protects these parts against outer particles such as gravel and it prevents the temperature increase in the motor.
The cooling system used in the hammer drill 850W consists of rotors and air vents. The rotors and air vents together make the air to circulate in the motor. This feature increases the device’s working efficiency and lifespan of the parts.
The hammer part of this power drill is equipped with a spring and an impact driver that performs the demolition operations. The high-quality alloy used in the hammer drill 850W 13mm structure protects the gears from corrosion for a long time.
The 13 mm chuck size in the hammer drill 850W allows a variety of drill bits, from 1.5 mm to 13 mm, installed on it. It is a keyed drill and the chuck consists of anti-wear shots (pellets) and gears that have the best performance in the long run.
Some of the hammer drill 850W 13mm features are listed below.
Hammer drill 850W Cable
The 2.5 m cable is flexible and soft, so the user can have better maneuverability. It conforms to the German VDF standards.
Hammer drill 850W Accessories
There’s a number of auxiliary handles inside the box of the hammer drill 850W with BMC that help the user to master the drilling and perform drilling operations with both hands. This device has a pair of brushes which can be used after the brush finishes. It is one of the best electric drills.