4.5″ Mini Angle Grinder DX-2175
- 750 W industrial and all copper armature and stator
- Resin coating to prevent damage to the armature and stator
- Anti-wear gears in the gearbox part
- High-quality grease for improving the performance of the metal components
- Dust-proof ball bearing
- Air vents on the body for air circulation inside the device
- Equipped with a filter to prevent dust penetration
- Equipped with a spindle-lock for easy disc changing
- Equipped with a brush cap for easy brush change
- An auxiliary handle with rubber coating
- Ergonomic design of the body for comfort during working
- Equipped with a guard for user safety
- Easy and fast disc change mechanism
- Equipped with a 3 m cable which conforms to the German VDE standard
4.5″ Mini Angle Grinder – Description
Have you ever tried stone or metal cutting? These materials are strong and it’s difficult to cut them. What you need is a 4.5″ mini angle grinder. Despite the light, compact and ergonomic design it is a powerful tool which you must have in your workshop.
Its wonderful 750 W motor makes you perform different projects. With changing the disc, you can perform a wide range of work, from cutting a metal rod into half to removing the extra material from the surface of a metal component.
With the unique designed auxiliary handle, working in unusual and different angles is made easier. In short, this angle grinder is suitable for cutting or grinding. The slim and light body makes it suitable for long hours of application.
4.5″ Mini Angle Grinder – Detailed Description
Some of the DX-2175 model specifications are mentioned below.
4.5″ Mini Angle Grinder Motor
The 750 W powerful motor of the 4.5″ mini angle grinder consists of an all-industrial and all-copper armature and stator which shows the best performance in cutting and grinding operation. This motor is equipped with a rotor and stator which are produced according to the European CE standard. One of the most important features of the motor is the no-load speed which is 11000 RPM and becomes very powerful in combination with the 115 mm disc.
The cooling system
As you may have experienced before, sometimes the body of the tool gets hot, especially when you are using them continuously. If this problem is not solved it can do damage to the device or even in some cases damage the motor.
To overcome this problem, Danlex has designed a direct motor cooling system for the 4.5″ mini angle grinder. Two sets of air vents are designed on the body, through one of them fresh air enters the device and with the help of the fan the hot air is transferred to the outside of the tool. This cooling system guarantees the long lifespan of the device and has an important role in its efficiency because the extreme heat can affect the performance.
4.5″ Mini Angle Grinder Features
Here are some features of this device.
Body and casing
In order to make it easier to use a 4.5” mini angle grinder, the body is designed to be as slim and light as possible. The slim and ergonomic body makes it easier to perform cutting and grinding operations in cramped spaces. It is a very light tool despite the amazing performance and the considerable power which prevents fatigue in long hours applications.
Guard or Disc Guard
The 4.5″ mini angle grinder includes a disc guard which is designed by Danlex. It guarantees the user safety during the cutting or grinding. The ability to change the position of the guard allows the user to use the short neck mini angle grinder at different angles.
The auxiliary handle
For more comfort and safety the 4.5″ mini angle grinder is equipped with an auxiliary handle which is designed by creative design engineers to reduce hand fatigue. It also allows the user to work in different positions.
The box of 4.5″ mini angle grinder includes a wrench, an auxiliary handle and a pair of spare brushes.
4.5″ Mini Angle Grinder – Technical data
a pair of brushes, a wrench, An auxiliary handle