Impact drill 1050W – Detailed Description

DX-1110

Here are some specifications about the DX-1110 model.

Motor

The motor of the impact drill 1050W consists of an armature and industrial stator with a power of 1050 W, made by devices that comply with European CE standards. The polyester and resin in the structure of the armature and stator leads to a strong coil winding and prevents damage to the coil surface. Besides that, the resin acts as a thermal insulator and it does not allow the heat transfer to other parts of the motor. The collector used in the armature of the impact drill 1050W 13mm is of a high quality so that it does not rust in long-term and it increases the working efficiency of the device.

Impact drill 1050W Cooling system

In the impact drill 1050W, the cooling system includes the impeller and ventilation valves, the outside air enters in through the impeller, and rotates on both sides of the motor and exits the rear valves which reduces the heat of the engine. This system increases the performance of the device and thus increases the lifetime of it.

Brush

One of the main parts of a power drill is the brush which is responsible for transmitting the current. The brush used in the impact drill 1050W is made of oil, which causes fewer sparks and increases the lifetime. 

Impact drill 1050W Grease

The grease is responsible for lubricating the parts and reducing the friction between the mechanical parts. The grease used in the impact drill 1050W is a calcium-based grease that prevents corrosion of the gear and mechanical parts over a long period.

Gearbox

The gearbox part of this impact drill 1050W 13mm consists of gears that are responsible for transferring power and speed. This gearbox has a shift chassis that provides the user with both power and speed modes.

• In the first mode: the rotation speed is lower, but the power is higher.
• The second mode has a higher rotation speed and less power.

These two modes can help the user in different drilling operations. In the structure of gearbox gears, the impact drill 1050W is made of integrated alloy; this feature reduces gear corrosion in the long run.

Ball bearings

Ball bearings also play an essential role in the operation of a power drill. The ball bearings used in this device are of anti-wear type which together with a high quality grease, prevent corrosion of the ball bearings.

Impact Drill 1050W Chuck

The impact drill 1050W has a 13 mm keyed chuck system. The keyed chuck system can accommodate various types of granite, wood, and metal drills with 1.5 to 13 mm diameter. The keyed chuck systems consist of gear and a shot(pellet) that is anti-wear and can have a good performance in the long run.

Features

Some of the features of the impact drill 1050W are mentioned below.

Impact drill 1050W Cable

The cable of this electric drill is flexible and soft, so the user can have better maneuverability. Thread is used in the wire structure of this device which makes the cable strong and resistant to outer cases. The cable of this device conforms to German VDF standards.

Accessories

Inside the box of impact drill 1050W 13mm is an auxiliary handle with an antiperspirant cover, a depth gauge ruler, a pair of spare brushes, and a keyed chuck wrench.